Electronic Design Services
Refine any step of hardware design with Conclusive Engineering. We are ready to start at the very beginning (sketches and planning) as well as jump in on the last stages during the production and testing process.
Here's everything you need to know about electronic design services provided by our engineers.
We work with innovators and Fortune 500 technology leaders
Custom Electronic Product Development
by Conclusive Engineering
Our vast offer of electronic design services includes:
Full-Cycle
Development
As the industry experts in embedded electronic design, we are ready to help at any stage of the projects.
From early concept to mass production, we are a reliable partner that will help you come up with a practical and cost-effective solution in electronic product development.
Get a free technical consultation
What Our Process Looks Like?
While hiring us for electronic design services, here's what you can expect:
First, we need to establish what is the desired outcome. At the start of the cooperation we schedule a meeting to define whether you need an engineer to assist in the full development lifecycle or just need an urgent fix to existing products.
After we establish the priorities and requirements, we proceed to design the actual electronics necessary for your project.
During step 3, we prototype custom hardware that can be later used in testing. We are able to produce electronic components in our headquarters but we also work closely with leading vendors from Western Europe.
We can use our in-house lab to thoroughly test the prototypes. We perform electrical bring-ups and measure the outcome of how new technologies behave. Our lab is equipped with state-of-the-art devices to thoroughly test your projects.
Read more about the hardware testing services.
As a part of electronic design services we provide, our team can also developm firmware and software necessary to successfully run the hardware.
Additionally, we are able to prepare your designs for mass production, including the execution of testers, programmers, etc.
Once the finalized project enters the production phase, we can still store your designs. In the future, we will be able to run security updates, revise the design, and fix bugs that may occur during maintenance.
Reviews and Testimonials
Here's what others think of our services.
“I strongly recommend Conclusive Engineering”
Conclusive's efforts provided the key integrated hardware and software platform that we used to deploy advanced biomanufacturing and tissue engineering equipment worldwide. I strongly recommend Conclusive Engineering as a reliable and experienced technological partner within the field of embedded software development and hardware design services
PhD SVP, Chief Scientist for Regenerative Medicine 3D Systems Corporation
“We found that they were very resourceful”
We found that they were very resourceful; they suggested improvements even though they didn't have expertise in our specific industry, which ultimately resulted in a product that exceeded our initial requirements.
VP of R&D, Dental Products & Services Company
“The team is flexible, responsive, communicative, and open to changes”
Conclusive Engineering has successfully delivered the entire components and designs the client required, marking the project's success. The team is flexible, responsive, communicative, and open to changes. Moreover, their willingness to suggest improvements has ensured a better result than expected.
Software Architect, Clevon AS
Why Us?
There are numerous benefits to using Conclusive Engineering hardware and electronics design services. We are thrilled to work with you.
Updates & Communication
We understand that good communication is the key to success. That's why we are always in contact with the customers during the project. Our engineers are ready to answer all your questions and schedule regular meetings to observe the development. Our skillful management and leadership are specialized in electronics manufacturing and understand complicated technical matters.
Get a free technical consultationWe usually do the following for our clients:
- dedicated Slack channel
- dedicated project supervisor
- regular project updates
- ability to work in the client’s time zone
- on-site visits
- and more
Norms & Certifications
Our custom PCB design service includes hardware testing and a certification process.
Main partners and Vendors
To avoid chip shortages and slow service, we maintain strong relationships with partners and vendors across the globe.
PARTNERS
VENDORS
Acknowledgment of Micron’s ownership of the particular Trademark | The ADI words and logos are trademarks of Analog Devices, Inc. (or its subsidiaries) in the U.S. and/or elsewhere. All rights reserved
Case Studies
Here's what working with Conclusive Engineering looks like in practice.
5G Automotive Gateway with Advanced Connectivity Options
Conclusive Engineering develops the Clevon 5G Gateway, enhancing connectivity for autonomous vehicles with advanced, robust design.
Read more
Development of a Modern Dental Chair Control Board with IoT Capabilities
One of the flagship products of DENTALEZ is a high-end dental chair, the 6400 Dental Patient Chair. The product features a hydraulic cantilever mechanism and mechanical assistant instrumentation.
Read moreCooperation
Are you interested in working with Conclusive Engineering? We can offer different payment options, such as time & material, fixed price, or hybrid alternatives.
Read more about our cooperation schemes
Get a tailored solution for your project needs – connect with our experts.
We would like to understand your project better before we start. We’ll review your project and get back to you.
Trusted partner by leading tech companies:
“We found that they were very resourceful; they suggested improvements even though they didn't have expertise in our specific industry, which ultimately resulted in a product that exceeded our initial requirements."
Robert Young
VP of R&D, Dental Products & Services Company
Talk to Conclusive Engineering Experts
Submit your project details and a Conclusive Engineering expert will contact you soon to discuss how we can support your project.
Usually the development includes 7 steps: 1) Defining the requirements 2) Creating a block diagram 3) Selecting components 4) Designing the schematic and printed circuit board 5) Manufacturing and assembly 6) testing 7) Optimization and mass production
Electronics are designed by electrical engineers, electronics engineers, and computer engineers, depending on the application. Electrical engineers focus on power systems and signal processing, electronics engineers specialize in circuit design and communication systems, while computer engineers develop hardware and embedded systems. Mechatronics and embedded systems engineers also contribute by integrating electronics into automation, robotics, and IoT devices.
We put maximum effort to make the designs 100% secure and up to date with the latest requirements. Our team is skilled in implementing functional safety to deliver reliable and secure solutions. We offer hardware testing & certification to follow the ever changing security landscape.